” Railplate ” mounting solution for benches with embedded Rails / T tracks. Rail plate

Description

” Railplate “

        The ” Railplate ” has slotted grooves that allows it to attach to benchtops that have T tracks/rails installed into them.  The slots are long enough to accommodate the majority of track spacing common to reloading benches. (See specs below)  It is threaded for and will accept 4 different height InLine Fab mounts.   Its a beast! 13lbs of thick steel supporting your presses!   In addition to the railplate, you will need one of the below.

• The Flush mount QC baseplate (No spacer needed)  (Here)
• 4″ Micro QC Ultramounts (Here)
• 7.5″ Junior QC Ultramounts (Here)
• 9 3/4″ tall quick change Ultramounts (Here)
• Also dedicated Ultramounts (Here)

Super versatile and can be removed quickly from the tracks if desired. 

Note: No “T” tracks or rails in your bench but want the versatility?  Just bolt the Railplate straight down to your benchtop with 5/16 lag screws or bolts.

The Railplate comes with hardware to attach the ultramounts from the top, so no need to remove the Railplate to install/swap mounts.   It is 1/4″ thick laser cut steel and stupid strong.

Note2: Does not work with 4″ Micro r 7.5″ JR Dillon 1050, 1100 mounts (Send me an email if you want that version)   

Measures 13″ deep by 14 1/2″ wide 

Will accept 1/4″ or 5/16 T track hold down hardware.

Downloadable PDF for bench planning purposes (Here) and  (Here)